You can change the length (number of measures) of a user pattern.
1. Select the user pattern whose length you want to change.
2. Press the [FUNCTION] key and then pad 5 (BAR LENGTH).
The number of measures for the user pattern selected in step 1 is shown.
3. Use the [VALUE +/-] keys to set the new bar length.
The bar length (number of measures) can be set in the range from 1 – 99.
4. Press the [FUNCTION] key.
The pattern length is changed. When a recorded pattern was made shorter, the excess measures at the end of the pattern will be cut off. When a recorded pattern was made longer, blank measures will be added at the end of the pattern.