Changing the Song Volume

This section describes how you can change the pattern volume within a song that has already been recorded.

1. In song mode, select the song whose volume you want to alter.

2. Press the [REC] key.

The [REC] key lights up, and the song can be edited.

3. Hold down the [SONG] key while pressing the [VALUE +/-] keys to select the step you want to edit.

The last two digits of the display show the step number.

4. Hold down the [FUNCTION] key.

While the [FUNCTION] key is being pressed, the volume change information for that step is shown on the display. If no volume information is stored for that step, the indication is "---".

5. While holding down the [FUNCTION] key, use the [VALUE +/-] keys to set the volume value (0 – 63).

6. If desired, set the volume for other song steps as well by repeating steps 3 – 5.

7. When you have completed the volume change input, press the [STOP] key.

It is not possible to record both tempo change information and volume change information in the same step. The most recently made setting will be valid.